BNC connector is a very common RF terminal coaxial cable terminator, also known as Q9 head in the industry. It is the most common coaxial cable connector in security monitoring engineering, audio and video engineering.
The BNC plug is also a standard coaxial cable connector. The BNC cable connector must be connected to both ends of each cable. It is generally used in video surveillance engineering and network engineering. Anti-interference connection between cable and device.
BNC screw-on plug, 75 Ohm, for RG6 series cables
1. BNC wiring types are divided into connection types: cold pressing type, extrusion type, assembly type, compression type, rotary type;
2. BNC circuit boards are divided into connection types: nut fastening, screw fastening and welding;
3. BNC transfer type: mainly to transfer the BNC female head to various other connectors;
4. BNC connection type: mainly connect the BNC female head as a BNC female head or a BNC male head.
Purpose of BNC Connectors
1. BNC connectors are used for the transmission of radio frequency signals, including the transmission of analog or digital video signals, the connection of amateur radio equipment antennas, the connection of avionics and other electronic test equipment;
2. BNC connectors In the field of consumer electronics, the BNC connectors used for video signal transmission have been replaced by RCA terminals. Through a simple adapter, the RCA terminals can be used on devices that only have BNC connectors;
3. BNC connectors are mainly used to connect workstations and other systems that require high scanning frequency. At present, it is also widely used in communication systems, and is often used to transmit audio/video signals in high-end monitors and audio equipment.
