How to crimp the connector? Correct operation of crimping with connector:
1. Before using the connector to press the device, preview the product specifications and check that the size of the connector and wire meets the connection requirements of the relevant device.
2. When the connector is automatically crimped, the crimping operation should be smooth, the connection to the interface should be accurate, and the tension of the wire should be suitable.
3. When crimping the connector, the closed position should be correct and the height should be accurate. The pressure connector should pay attention to whether there is a wire head and whether the air pressure is within the specified range.
4. After the connector is crimping, it should be inspected externally to see if there are any bad problems and ensure that the crimping process is no problem.
5. Pay attention to the depth of the connector crimping, do not think that it is ok to touch a little, that is wrong. Because the crimping depth of different equipment is not the same, as those professional knowledge said, the connector in the crimping if not strict attention, will lead to unqualified products, consumers will bring serious losses when used.
In fact, the performance and quality of the product is also very important when crimping the connector, because the level of product performance and quality will also have an impact. So in addition to pay attention to the connector in the pressing of some matters, but also pay attention to the performance and quality of the product equipment.
